This is the biggest update I've ever seen from Mikrotik. 181 items! What's new in 6.35 (2016-Apr-14 12:55): Known issue: some huawei lte modems might not get IP address after the reboot of the router - disable/enable of the modems interface fixes that *) arp - apply Linux Kernel patch to stop RouterOS from randomly exhibiting misplaced ARPs; -Exchanges will like this *) mipsbe - (excluding RB4xx and CRS series) fixed rare ethernet tx buffer corruption; *) nand - implemented once a week nand refresh to improve stored data integrity (will increase sector writes); -Do what?! *) pppoe-client - implemented fastpath support; -I'm sure this is a big one *) l2tp - implemented l2tp and lns fastpath/fasttrack support; *) queue - added bucket-size setting to queues (derived from max-limit); *) tile - fixed rare situation when some cores decide not to take part in packet processing till next reboot; *) tunnels - fixed performance slowdown on any other tunnel disable/enable; *) winbox - increased minimal required winbox version to 3.4; -Well I guess the embedded winbox in dude needs updated now. *) wireless - added new package "wireless-rep"; *) wireless - improved 1-chain 802.11ac station compatibility with other vendor multi-chain APs; *) address-list - fixed crash in low memory situations; *) bonding - fixed crash when creating vlans on bonding interface; *) capsman - added 802.11g/n band; *) capsman - fixed capsman extension channel names; *) certificate - revoked certificates not showing as (R)evoked; *) certificate - allow manual crl url addition; *) chr - added support for VLAN on Hyper-V; *) chr - fixed Hyper-V booting from SCSI; *) chr - fixed Hyper-V on windows 8/10 reboot loop; *) chr - fixed bridge firewall; *) chr - fixed kernel crash when virtual ethernet was not connected to anything in Hyper-V; *) chr - implemented automatic storage increase on disk image size increase; -woohoo *) chr - implemented kernel crash saving to autosupout.rif (will utilize additional 24Mb of RAM); *) chr - make shutdown request from hyper-v work (might fix other hypervisor as well); *) chr - no more installation on first boot; *) chr - try to renew expired license once a hour instead of 100h; *) cloud - don't write minor status changes to storage; *) console - fixed print follow in "/ip dns cache" menu; *) console - show RouterOS Version in /interface wireless scan; *) console - sort completions/hints in natural order; *) console - update copyright notice; *) defconf - fixed default configuration for SXT LTE; *) dhcpv6-client - fixed wrong error message; *) dhcpv6-client - fix ia expiration and lifetime validation; *) dhcpv6-server - acquire binding on renew if it does not exist; *) dude - (changes discussed here: http://forum.mikrotik.com/viewtopic.php?f=8&t=104395); *) dude - fixed dude login logging, no more shows as winbox login; *) email - fixed send cmd server addr override; *) ethernet - add option to see S-GPON-ONU module, GPON side SN in "/int eth mon sfp#"; *) ethernet - do not allow to set self as master port; *) export - bonding did not show up in global export; *) export - exclude default values from export in "/interface l2tp-server server" menu; *) export - fixed export when ipv6 address was taken from pool; *) export - fixed rare situations when not whole config was exported; *) export - updated defaults for compact export; *) fastpath - fixed crash when packet arrives on disabled interface; *) fastpath - fixed show rx-bits-per-second on all VLAN interfaces; *) fastpath - improved vlan fastpath; -Nice! *) fasttrack - fixed timer updating in connections table for fasttrack connections; *) fetch - decrease connection idle timeout; *) firewall - added experimental "action=route" in mangle prerouting - that forces packets to specific gateway by ignoring routing decisions (CLI only); -I wonder ow this could be used? *) health - always report fan speed (even if it is 0); *) health - swap fan2 and fan3 on CCR1072; *) hotspot - clean-up all dead entries at once; *) hotspot - fixed possible deadlock; *) hotspot - improved html page resistance against attacks; *) hotspot - make video tag work properly on hotspot login.html page *) ip - rename max-arp-entries to less confusing max-neighbor-entries; *) ippool6 - fixed potential crash; *) ipsec - always re-key ph1 because it was possible that ph1 without DPD would expire; *) ipsec - better flush on proposal change; *) ipsec - fixed crash on policy update; *) ipsec - fixed fast ph2 SA addition; *) ipsec - fixed larval SA refresh for display; *) ipsec - fixed multiple consecutive dynamic policy flush; *) l2tp & pppoe - fixed user traffic accounting when fastpath was used; *) l2tp - introduced per tunnel allow-fast-path option; *) l2tp - added support for Hidden AVP, it is needed for proxy authentication; *) l2tp - added support for max-sessions; *) l2tp - added support for proxy authentication when receiving forwarded PPPoE sessions; *) l2tp - fixed small memory leak on reconnects; *) lcd - fixed branding packet logo drawing on startup; *) led - fixed crash on assigned interface removal; *) led - turn on fault led on CCR1072 if CPU too hot; *) leds - fixed AP-CAP led blinking after successful association to CAPsMAN; *) lte - added ipv6 support for SXT LTE; *) lte - changed AT command processing; *) lte - changed AT parsing because supported Huawei modems use unsolicited events instead of polling; *) lte - fixed bandlux modem dialing; *) lte - fixed crash on early initialization; *) lte - improve situation when SXT modem never finds operator; *) lte - replaced signal-strength with rssi in info command; *) lte - support Alt38XX modem; *) lte - support for zte mf820s2; *) lte - supported modems now use unsolicited events for network monitoring; *) lte - use timer for modem info; *) map lite - added hardware WPS button support; *) mpls - do not reset VPLS on TE tunnel re-optimize; *) ntp - fixed ntp client hangs in reached state; *) ospf - fixed crash when getting neighbor router-id in NBMA area; *) ppp - fixed ppp interface reconnect when uPnP was used; *) ppp - close connection if peer wants to re-authenticate; *) ppp - fixed memory leak high number of pppoe clients to the same server; *) ppp - fixed ppp crash if lcp packets were lost and authentication got delayed; *) ppp - fixed some clients can not connect due to LCP restart; *) pppoe - added rfc4679 support; *) pppoe - fixed crash when removing pppoe service; *) pppoe-server - added pado-delay option; *) profiler - classify certificate signing; *) proxy - fixed ftp request url decode; *) queue - improve "/queue interface" menu; *) quickset - fixed invalid date adjusted the signal threshold for the signal chart and refresh rate; *) quickset - fixed situations when hidden password was passed as ******* from winbox nd webfig; *) radius - warn radius client if incorrect secret is being used; *) rb3011 - fixed sfp compatibility with CCR when using direct attached cables; *) rb3011 - fixed time keeping; *) rb3011 - make ether6-ether10 work if SFP module is present on bootup; *) romon-ssh - fixed active addresses for romon user; *) route - do not show duplicate gateway on connected route; *) route - fixed filter by routing table; *) routing - fixed rare kernel failure on different dynamic routing configurations; *) routing - fixed routing-marks were not erased from memory when they are not being used; *) services - do not show ssh entry under ip services if security package is disabled; *) snmp - don't group oids for bulk get with maxreps > 1 ; *) snmp - fixed cpu load reporting to 1min average and change oid to 184.108.40.206.4.1.2021.11.10.0; *) snmp - fixed dhcpv4 lease hwaddr format according to mib; *) snmp - fixed getbulk result ordering with multiple request OIDs; *) ssh - simplify login process; *) ssl - optimized certificate update; *) system - log time changes; *) tile - corrected max-l2mtu; *) tile - fixed fastpath related memory leak; *) tile - fixed performance regression on switch chip (introduced in 6.33rc18); *) tile-crypto - fixed minor memory leak; *) tool fetch - fixed https cleanup on user stop while handshaking; *) trafficgen - fixed console arguments; *) trafficgen - fixed crash when unexpected stream reappears; *) trafflow - fixed potential deadlock; *) ups - fixed entering hibernate mode when below battery capacity limit; *) users - added separate RoMoN policy; *) webfig - fixed firewall rule sorting did not work in other chains except all; *) webfig - show single item groups as optional values; *) webfig - sort numeric columns numerically even if they contain some text; *) winbox - added "pw-type" to "/interface vpls bgp-vpls" menu; *) winbox - added "use-control-word" and "pw-mtu" to "/interface vpls cisco-bgp-vpls" menu; *) winbox - added /interface wireless setup-repeater; *) winbox - added all the rates settings to the capsman; *) winbox - added flip-screen option to lcd settings; *) winbox - added init-delay option to routerboard settings; *) winbox - added ipv6 firewall missing log option; *) winbox - added missing eap-ttls-mschamv2 method to wireless security profile; *) winbox - added mtu=auto support to eoipv6 tunnel; *) winbox - added sfp-mac for GPON interfaces; *) winbox - added support for new settings from wireless-rep package; *) winbox - added support for route action in mangle rules; *) winbox - allow to set additional-network-modes; *) winbox - allow to set multiple dh-groups; *) winbox - disable autostart for wireless scan,snooper,align etc. on open; *) winbox - do not show "enable-jumper-reset" setting on devices without serial port; *) winbox - do not show real-tx-power column in current-tx-power by default; *) winbox - fixed unset options in /routing ospf interface menu; *) winbox - hotspot default-trial user shows profile as "unknown" in Winbox; *) winbox - improved winbox connection loss detection, fixes winbox safe mode; *) winbox - limit ospf key to 16 symbols; *) winbox - make additional-network-mode optional for lte interface; *) winbox - make build with latest lte changes; *) winbox - make mrru disabled and set mtu+mru to auto by default on new servers; *) winbox - show "usb-power-reset" option on all boards that have it; *) wireless - fixed crash on nstreme-dual interface stats update; *) wireless-rep - added 802.11g/n only band; *) wireless-rep - added STEP feature for the scan-list; *) wireless-rep - added WPS client support; *) wireless-rep - added support for saving wireless scan results to file; *) wireless-rep - added support for wireless background scan for 802.11 protocol; *) wireless-rep - added support for wireless repeater mode for 802.11 protocol; *) wireless-rep - added support for wireless scan rounds setting; *) wireless-rep - adjust roaming scan times; *) wireless-rep - allow to connect to AP after scan; *) wireless-rep - do not allow empty ssid for AP modes; *) wireless-rep - fixed crash on non-HT clients; *) wireless-rep - fixed latency issues with Intel wireless clients; *) wireless-rep - fixed nv2 protocol; *) wireless-rep - fixed qos frame-priority when nv2 protocol used in station-wds mode; *) wireless-rep - fixed signal leds; *) wireless-rep - fixed speed issue when connected with Intel 802.11ac; *) wireless-rep - initial support for station roaming for station mode in 802.11 protocol; *) wireless-rep - request interface name for setup-repeater; *) wireless-rep - use full identity where possible; *) wireless-rep,capsman - added more configuration settings; *) wireless-rep,capsman - added rate config support.